5" K-style — the standard
Suitable for most single- and 1.5-storey homes with moderate roof area. Holds the volume of a Grey County downpour without overflowing if the downspouts are sized properly.
Seamless eavestrough installation across Grey County
Custom-rolled 5″ or 6″ K-style aluminum eavestrough, installed in a single seamless length per run, with matching downspouts, hidden hangers, end caps, and elbows. Old eavestrough is taken down and removed at no extra charge. WSIB-covered, fully insured, HST-registered.
Seamless installation runs $10–$15 per linear foot installedWSIB · Fully insured · HST registered
Custom-rolled aluminum, no field-joined seams to leak.
Seamless eavestrough is custom-rolled aluminum that is cut to the exact length of each roof run, on-site, on the day of the install. There are no field-joined seams to leak, no factory-cut sections that need silicone every five years, and no patchwork ends to peel apart in the freeze-thaw. Bayline Eaves rolls the trough on a truck-mounted machine, hangs it on hidden hangers screwed into the fascia (not nailed into the soffit), runs the matching downspouts to ground level, and removes the old eavestrough at no extra charge. The result is a continuous run of factory-baked aluminum that lasts 25–30 years on a Grey County home.
Every seamless eavestrough quote covers
- Custom-rolled aluminum trough cut to length on-site — no field-joined seams to leak
- Choice of 5" or 6" K-style profile based on roof area and pitch
- Wide range of factory-baked colours to match fascia, soffit, or roof
- Matching downspouts, hidden hangers, end caps, and elbows included in the per-foot price
- Old eavestrough taken down and removed at no extra charge
- WSIB-covered, HST registered, and fully insured
The seamless eavestrough installation process
- 1On-site quote and measure
Bayline Eaves measures every accessible run, counts the corners, and locates downspouts where the grade is right for run-off. The quote is written, includes HST, and is sent by email — no on-the-ladder verbal price.
- 2Profile + colour confirmation
You confirm 5" K-style (most homes) or 6" K-style (steep roofs, big roof areas, heavy snow load), then pick a factory-baked colour to match fascia, soffit, or roof.
- 3Old trough removed
On install day, the old eavestrough and downspouts are taken down, the fascia is checked for soft spots, and any loose fascia board is screwed back tight before the new trough goes up.
- 4Seamless run rolled on-site
The truck-mounted roller forms each run in a single seamless length of aluminum. Each piece is custom to the millimetre — no off-the-shelf 10-foot sections joined together.
- 5Hidden hangers + downspouts
Trough is hung on hidden hangers screwed directly into the fascia at 24-inch spacing (16-inch in the snow-load corners). Downspouts are run to grade in 2"x3" or oversized 3"x4" depending on roof area.
- 6Site cleaned, written warranty
Old eavestrough is hauled away. The site is magnet-swept for screws and brackets. A written workmanship warranty is emailed with the invoice.
Seamless eavestrough installation by town
Bayline Eaves installs seamless aluminum eavestrough across twelve Grey County and Southern Georgian Bay communities. Every town has a dedicated install page with local pricing, sizing notes, and the towns and concession roads covered.
Seamless eavestrough — frequently asked
How long does seamless eavestrough last?
A properly hung seamless aluminum trough lasts 25–30 years on a Grey County or Southern Georgian Bay home. The factory-baked finish does not flake, and there are no seams to leak.
What's the difference between 5-inch and 6-inch eavestrough?
5-inch K-style is the standard for most single- and 1.5-storey homes. 6-inch is recommended for 2-storey homes, big roof areas, or properties with long uninterrupted runs — the extra capacity stops corner back-ups during heavy storms.
Do you install half-round eavestrough?
Bayline Eaves installs K-style seamless aluminum, which is the standard across Grey County. Half-round is a heritage-look option that's quoted separately on request, but the K-style profile holds more water and costs less per foot.
Do you take down the old eavestrough?
Yes — old eavestrough and downspouts are taken down and hauled away at no extra charge. The fascia line is also checked for soft spots and screwed back tight before the new trough goes up.
How long does an install take?
A typical single-storey home is installed in one day. Larger 2-storey homes or homes with extensive fascia repair are usually finished in a day and a half.
What colours are available?
20+ factory-baked colours including white, brown, black, charcoal, almond, evergreen, and heritage tones. The colour is baked onto the aluminum coil, not painted on after, so it does not peel or flake.
Do you offer leaf protection?
Yes. Mesh and foam leaf-protection inserts can be added on install day at a per-foot upcharge — most useful for properties with mature maple, ash, or pine overhead.
Is the install warrantied?
Yes. Bayline Eaves provides a written workmanship warranty on every install, emailed with the invoice. The aluminum stock itself carries the manufacturer's finish warranty.
Just need the eavestrough cleaned?
If your existing trough is in good shape and just needs to be cleared, see the eavestrough cleaning service — starting at $200 for a single-storey home, with photo proof emailed after the job. Contractors and handy homeowners can also order seamless run-off (trough only) for self-install.
Ready for a written install quote?
Call 519-372-7996, email [email protected], or send your property details and a couple of photos through the install quote form. A written reply usually lands within one business day.